CRANKCASE - GEAR SIDE

DOWEL PIN (2 - as req`d.) 71 to * - All Models

DOWEL PIN 71 to * - All Models

PLUG, crankcase 71 to * - All Models

PLUG, oil screen 71 to 80 - All Models

SCREW, 1/4-20 x 1 Pozidriv oval ctsk. hd. (black) N/A 77 to 79 - FXS, FXS-80

SCREW, 1/4-20 x 1-1/4 Pozidriv oval ctsk. hd. (black) 77 to 79 - FXS, FXS-80

SCREW, 1/4-20 x 1-3/4 Pozidriv oval ctsk. hd. (black) N/A 77 to 79 - FXS, FXS-80

SCREW, 1/4-20 x 1-1/4 Pozidriv fil. hd. (2 in 1980) 71 to 80 - FX, FXE, FXEF; 79 - FXEF-80

SCREW, 1/4-20 x 1 Pozidriv fil. hd. 71 to 80 - FX, FXE, FXEF; 79 - FXEF-80

SCREW, 1/4-20 x 1-3/4 Pozidriv fil. hd. N/A 71 to 80 - FX, FXE, FXEF; 79 - FXEF-80

SCREW, No. 8-32 X 1/2 Pozidrivflat ctsk. hd. (Grade 2 steel)

SCREW No. 10-24 X 1/2 TORX pan hd.

SCREW, No. 8-32 x 5/8 Pozidriv hd. 73 to 79 - All Models

SCREW, No. 8-32 x 1/16 ctsk. hd. 71 & 72 - All Models

SCREW, 1/4-20 X 1-1/4 knurled socket hd. (w/lockpatch)

SCREW, 1/4-20 X 1-3/4 knurled socket hd. (Grade 8 steel)

SCREW, 1/4-20 X 1-3/8 knurled socket hd. (w/lockpatch)

SCREW, 1/4-20 X 1-1/8 knurled socket hd. (w/lockpatch)

ACORN HEAD BOLT, 1/4-20 x 1-1/4 N/A 80 to 82 - FXB

ACORN HEAD BOLT, 1/4-20 x 1 N/A 80 to Early 82 - FXB

ACORN HEAD BOLT, 1/4-20 x 1 N/A 80 to 82 - FXB

ACORN HEAD BOLT, 1/4-20 x 1-1/4 N/A 80 to 82 - FXB

ACORN HEAD BOLT, 1/4-20 x 1-3/4 N/A 80 to 82 - FXB

WASHER, 1/4 X 7/16 X 1/16

WASHER, No. 8 X 7/16 X 3/64

WASHER, 1/4 X 5/8 X 1 /16

POP RIVET, 3/16 x 3/8 x 3/8 dia. hd. 80 to * - AI1 Models

NEEDLE BEARING crankcase cam cover

CLAMP, electronic ignition wire 80 to * - All Models

RETAINING RING, oil pump drive shaft 71 to * - All Models

O-RING 71 to * - All Models

KEY, gear shaft (2 - Early 75 & Earlier) 71 to * - All Models

PINION GEAR 71 to 77 - All Models

NUT, gear shaft 71 to * - All Models

PINION GEAR, 1.4751-56 pitch dia. (orange) 78 to * - All Models

PINION GEAR, 1.4745-51 pitch dia. (white) 78 to * - All Models

PINION GEAR, 1.4737-45 pitch dia. (yellow) 78 to * - All Models

PINION GEAR, 1.4729-37 pitch dia. (red) 78 to * - All Models

PINION GEAR, 1.4721-29 pitch dia. (blue) 78 to * - All Models

PINION GEAR, 1.4715-21 pitch dia. (green) 78 to * - All Models

PINION GEAR, 1.4710-15 pitch dia. (black) 78 to * - All Models

CAM & PINION GEAR SET 71 to * - All Models

BUSHING, oil pump shaft 71 to * - All Models

SPACER, gear shaft pinion 71 to * - All Models

OIL SCREEN, crankcase 71 to * - All Models

OIL SCREEN SPRING 71 to * - All Models

GEAR COVER

GASKET gear cover

GEAR COVER

GASKET gear cover

GEAR COVER 80 to 84 - FXS-80, FXWG, FXE-80, FXSB | Consists of besides gear cover: 11, 43, 68

COVER, breather valve Late 82 to * - All Models

FITTING, straight

SPACER, gear cover 73 to 79 - FXE, FXEF; 77 to 79 - FXS

THRUST WASHER, breather valve - .115 thick 71 to Early 79 - All Models

BREATHER VALVE, with gear 71 to Early 77 - All Models

BREATHER VALVE GEAR

THRUST WASHER, breather valve - .120 thick 71 to Early 79 - All Models

THRUST WASHER, breather valve - .125 thick 71 to Early 79 - All Models

THRUST WASHER, breather valve - .110 thick 71 to Early 79 - All Models

THRUST WASHER, breather valve - 0.110 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.115 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.120 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.125 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.130 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.135 thick (steel) Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.140 thick (steel). Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.145 thick (steel). Late 79 to Early 82 - All Models

THRUST WASHER, breather valve - 0.130 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.135 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.140 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.145 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.150 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.155 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.160 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

THRUST WASHER, breather valve - 0.165 thick (plastic) Late 82 to * - All Models | NOTE: use only plastic washers with plastic breather valve. Do not intermix plastic and steel parts.

CAM GEAR 71 to 77 - All Models

Cam Gear - Late 77 to 84 Big Twins

THRUST WASHER, cam gear - 0.050 thick 71 to * - All Models

THRUST WASHER, cam gear

THRUST WASHER, cam gear - 0.055 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.060 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.065 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.070 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.075 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.080 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.085 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.090 thick 71 to * - All Models

THRUST WASHER, cam gear - 0.095 thick 71 to * - All Models

BUSHING, gear cover 71 to * - All Models

BUSHING, gear cover pinion shaft

DRIVE GEAR, oil pump - 25 T N/A 71 & 72 - All Models

DRIVE GEAR, oil pump - 24 T 73 to * - All Models

DRIVE SHAFT, oil pump 71 to * - All Models

KEY, oil pump gear (2; 1 - gear shaft - Late 75 & Later) 71 to * - All Models

DRIVE GEAR, oil pump N/A 71 & 72 - All Models

DRIVE GEAR, oil pump 73 to * - All Models

COVER inner

TIMER COVER (polished) 80 to 82 - FXE, FXEF, FXEF-80, FXE-80

TIMER COVER, (black) 80 to 82 - FXS-80, FXB, FXWG

TIMER COVER, polished aluminum N/A 83 to * - All Models

LABEL, timer cover N/A 71 to 79 - All Models

GASKET, ignition cover

STUD, ignition timer cover 80 to * - All Models

CLAMP, circuit breaker wire 71 to 79 - All Models

Oil line fitting, rocker arm cover-front - 81 to 84 FLH-80, Classic, FX

OIL SEAL 71 to * - All Models